Flame Sorb is specially formulated for on-site flame
retardant treatment of most synthetic and blended textiles as well as natural fibers,
including leather. It can be used to treat wood and other fibrous materials to allow them
to meet the rigid flame resistance specifications of building codes. It enables properly
treated materials to meet the non-ignition non-burning and zero afterflow requirements of
most international standards.
Flame Sorb is a colorless,
non-toxic, non--corrosive, non-irritating aqueous liquid which has no effect on the color
of most treated materials. After drying, it is resistant to normal " wear and tear
" or dry cleaning with non-aqueous cleaning materials.
Treatment of in-place materials with the Applicator Package is usually accomplished by spraying, but
brushing or soaking methods are sometimes used. Applications are made to fabrics and
interiors of residences, commercial buildings, hotels, aircraft, passenger vehicles and
vessels. It does not affect the drape, strength, colorfastness, feel, or appearance of the
treated fabrics. Once a fabric is treated, it should be allowed to dry between 6 and 24
hours, depending upon temperature, ventilation and humidity.
The Flame
Sorb formula passed:
( Tested in Nationally Accredited Independent Laboratory Tests )
NFPA 701
UL 214
California Fire Code Title 19 Paragraph 1237.1
New York City Fire Code 1940 Paragraph
UFAC Fabric Class (Cigarette Test)
FMVSS 302 Horizontal Fabric Flammability
DOC FF 1-70/2-70 (Pill Test)
ASTM E84-81A (Steiner Tunnel Test)
FAR 25.853 (B-3) Horizontal Flammability for Aircraft
Fabrics
FAR 25.853 (b) Vertical Flammability for Aircraft Pass.
Compartment Fabrics
FAR 25.853 Appendix F Part II ( Oil Burner Test ) Seat
Cushion Flammability
Flame Sorb is available in 5 gallon containers @ $
225.00 / 5 gal. , plus shipping and handling. For more information or to
place an order, please contact:
Janus International
P.O. Box 17079, Tampa, FL
33682-7079 USA Phone:813-995-9151- FAX: 813-996-3212
